This article explains the procedure to read data from SD card in the device.
1. Starting of with, login to Enterprise console with valid credentials
2. In default policies, reading data from SD card is restricted for security purpose. Enable option by going to Policy Group > Policy > Security > Disable Physical Media Mounting
3. Click on AMCloud option on left menu. Notice list of groups that are similar to the groups you see in "Policy Groups". This gives an option to share important and relevant content with specific users/groups (as highlighted in below).
4. Click on the group to which you would like to enable SD card option and give access to device users to read data from SD card.
5. Click on settings button (cogwheel icon) and enable SD card as shown below and save.
6. Upon saving the configurations, you will redirected to group page where you can start adding files. Please look below picture.
7. From the drop down, select SD Card
8. Click on "+" button to add storage path
9. You will have to provide the path at which the files are located on SD card.
10. Remember to provide the path until the files are placed. The structure should be like Root Folder/Sub-Root folder. Files that are under Sub-Root folder will be shown to user.
In below picture, files are placed under Manuals folder, hence the path is just mentioned as Manuals.
11. Clicking on "Add" should navigate back to groups page
12. On the device, click on AMCloud app. If will ask to enter passcode, if enabled. Else you should not see passcode option.
13. Notice SD Card section in AMCloud (as enabled on console in above steps).
14. Click on SD Card to view the permitted folders. As an example, Manuals is added, hence the same is seen. Click on it to view the files.
We hope this article was useful. Thank you for reading. For more AMGuard insights, please explore the Visual Knowledge-base Series.
For more details, please do visit https://augmentalis.com
If you need any help on this, contact AMGuard Support Email.